[code][/code]

[Guide] Zotac GTX 980 Amp! Extreme edition modding

Discuss all things relating to pixel pushers.
Luumi
Lance Corporal
Lance Corporal
Posts: 121
Joined: Wed Oct 15, 2014 2:01 am

[Guide] Zotac GTX 980 Amp! Extreme edition modding

Post #1 by Luumi » Wed Nov 19, 2014 2:20 am

Hey all. I have just posted all my experience and findings along with from RRainbo at kingpincooling to figure out all essential mods for 980 extreme from zotac. Mods should apply for both 970 and 980 Omega and Extreme models since pcb and components design is the same. I already posted a full guide at OCN here so I dont think its worth copy pasting it here: http://www.overclock.net/t/1525431/guid ... ding-guide

If you guys have any of these cards here is your solution to get volts up and power limit out of the way :). Give me some comments on this.



User avatar
twisted1
Corporal
Corporal
Posts: 261
Joined: Sat Oct 11, 2014 12:35 am
Location: Sweden

Re: [Guide] Zotac GTX 980 Amp! Extreme edition modding

Post #2 by twisted1 » Wed Nov 19, 2014 4:08 pm

Vmods are fun, I've recently started modding myself. Starting out with older cards as I'm sure I'll break some of them. Got a GTX8800 modded now, but have plenty others that I'd like to mod.

Post some results when you get some benching done with it.

User avatar
Frenzic
Warrant Officer
Warrant Officer
Posts: 1359
Joined: Wed Nov 21, 2012 12:01 am
Location: Woodbridge, United Kingdom

Re: [Guide] Zotac GTX 980 Amp! Extreme edition modding

Post #3 by Frenzic » Wed Nov 19, 2014 11:10 pm

Good guide, thanks, perhaps this should be moved to the Useful Guides section? :)
i7-4930K @ 4.4GHz|ASUS RIVF|Gigabyte GTX 780 Ti WF OC SLI|
16GB HyperX Beast 2400MHz|Corsair H80i|Corsair RM1000|
OCZ-Vertex450 256GB SSD|Corsair Carbide 500R|BenQ XL2720T

Luumi
Lance Corporal
Lance Corporal
Posts: 121
Joined: Wed Oct 15, 2014 2:01 am

Re: [Guide] Zotac GTX 980 Amp! Extreme edition modding

Post #4 by Luumi » Sat Nov 22, 2014 9:27 pm

Faced a big issue. I couldnt figure out VID mod nor I got any help on it so I went and tried on LN2 but the OVP hits hard at around 1.47-1.48v. More cold after -90 doesnt help due to that. Card seems to be able to run at almost no CB on ln2 at all. CBB around -120. I only got core up to 1710 due to this :(, memory goes well though. 2300 is doable easilly. This is the only result I saved in a hurry while testing the card: http://hwbot.org/submission/2679921_


Return to “Graphics Cards”




  Who is online

Users browsing this forum: No registered users and 2 guests